add new key & led

@@ -26,11 +26,14 @@ typedef enum
 #define LED_TOTAL_STATE_NUM 4
 
 /* LED control defines --------------------------------------------------------*/
-#define LED1_Reset() HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET)
-#define LED1_Set() HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET)
+#define LED1_Close() HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET)
+#define LED1_Open() HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET)
 
-#define LED2_Reset() HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_RESET)
-#define LED2_Set() HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_SET)
+#define LED2_Close() HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_RESET)
+#define LED2_Open() HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_SET)
+
+#define LED3_Close() HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_SET)
+#define LED3_Open() HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_RESET)
 
 extern LED_State ledState;
 

@@ -64,6 +64,8 @@ void Error_Handler(void);
 #define DEBUG_RX_GPIO_Port GPIOA
 #define BEEP_Pin GPIO_PIN_12
 #define BEEP_GPIO_Port GPIOA
+#define LED3_Pin GPIO_PIN_5
+#define LED3_GPIO_Port GPIOB
 #define LED2_Pin GPIO_PIN_6
 #define LED2_GPIO_Port GPIOB
 #define LED1_Pin GPIO_PIN_7

@@ -19,23 +19,23 @@ void LED_StateControl(LED_State ledMode)
   switch (ledMode)
   {
     case LED00:
-      LED1_Reset();
-      LED2_Reset();
+      LED1_Close();
+      LED2_Close();
       break;
 
     case LED01:
-      LED1_Reset();
-      LED2_Set();
+      LED1_Close();
+      LED2_Open();
       break;
 
     case LED10:
-      LED1_Set();
-      LED2_Reset();
+      LED1_Open();
+      LED2_Close();
       break;
 
     case LED11:
-      LED1_Set();
-      LED2_Set();
+      LED1_Open();
+      LED2_Open();
       break;
 
     default:

@@ -56,6 +56,7 @@ osThreadId_t KeyScanTaskHandle;
 osThreadId_t UartTaskHandle;
 osThreadId_t CoreTaskHandle;
 osThreadId_t SensorTaskHandle;
+osMessageQueueId_t KeyStatusQueueHandle;
 
 /* Private function prototypes -----------------------------------------------*/
 /* USER CODE BEGIN FunctionPrototypes */
@@ -93,6 +94,13 @@ osKernelInitialize();
   /* start timers, add new ones, ... */
   /* USER CODE END RTOS_TIMERS */
 
+  /* Create the queue(s) */
+  /* definition and creation of KeyStatusQueue */
+  const osMessageQueueAttr_t KeyStatusQueue_attributes = {
+    .name = "KeyStatusQueue"
+  };
+  KeyStatusQueueHandle = osMessageQueueNew (4, sizeof(uint8_t), &KeyStatusQueue_attributes);
+
   /* USER CODE BEGIN RTOS_QUEUES */
   /* add queues, ... */
   /* USER CODE END RTOS_QUEUES */
@@ -101,23 +109,23 @@ osKernelInitialize();
   /* definition and creation of LEDTask */
   const osThreadAttr_t LEDTask_attributes = {
     .name = "LEDTask",
-    .priority = (osPriority_t) osPriorityNormal,
-    .stack_size = 128
+    .priority = (osPriority_t) osPriorityNormal5,
+    .stack_size = 512
   };
   LEDTaskHandle = osThreadNew(StartLEDTask, NULL, &LEDTask_attributes);
 
   /* definition and creation of KeyScanTask */
   const osThreadAttr_t KeyScanTask_attributes = {
     .name = "KeyScanTask",
-    .priority = (osPriority_t) osPriorityNormal,
-    .stack_size = 128
+    .priority = (osPriority_t) osPriorityNormal3,
+    .stack_size = 512
   };
   KeyScanTaskHandle = osThreadNew(StartKeyScanTask, NULL, &KeyScanTask_attributes);
 
   /* definition and creation of UartTask */
   const osThreadAttr_t UartTask_attributes = {
     .name = "UartTask",
-    .priority = (osPriority_t) osPriorityNormal,
+    .priority = (osPriority_t) osPriorityNormal3,
     .stack_size = 512
   };
   UartTaskHandle = osThreadNew(StartUartTask, NULL, &UartTask_attributes);
@@ -125,16 +133,16 @@ osKernelInitialize();
   /* definition and creation of CoreTask */
   const osThreadAttr_t CoreTask_attributes = {
     .name = "CoreTask",
-    .priority = (osPriority_t) osPriorityNormal,
-    .stack_size = 128
+    .priority = (osPriority_t) osPriorityNormal3,
+    .stack_size = 512
   };
   CoreTaskHandle = osThreadNew(StartCoreTask, NULL, &CoreTask_attributes);
 
   /* definition and creation of SensorTask */
   const osThreadAttr_t SensorTask_attributes = {
     .name = "SensorTask",
-    .priority = (osPriority_t) osPriorityNormal,
-    .stack_size = 128
+    .priority = (osPriority_t) osPriorityNormal5,
+    .stack_size = 512
   };
   SensorTaskHandle = osThreadNew(StartSensorTask, NULL, &SensorTask_attributes);
 
@@ -154,13 +162,15 @@ osKernelInitialize();
 void StartLEDTask(void *argument)
 {
   /* USER CODE BEGIN StartLEDTask */
-
+  uint8_t keyState;
   /* Infinite loop */
   for(;;)
   {
-    // ledState = ledState % LED_TOTAL_STATE_NUM;
-    // LED_StateControl(ledState);
-    osDelay(1);
+    if (osMessageQueueGet(KeyStatusQueueHandle, &keyState, 0, portMAX_DELAY) == osOK) {
+      ledState = (keyState - 1) % LED_TOTAL_STATE_NUM;
+      LED_StateControl(ledState);
+    }
+    osDelay(10);
   }
   /* USER CODE END StartLEDTask */
 }
@@ -186,9 +196,8 @@ void StartKeyScanTask(void *argument)
       osDelay(10);
       if (KEY1_read() == KEY1_UP)
       {
-        LED2_Reset();
+        LED3_Close();
         count = 0;
-        flag = 0;
         goto DONE;
       }
       if(count < 500)// 0 ~ 5 000 ms
@@ -196,7 +205,7 @@ void StartKeyScanTask(void *argument)
         flag = KEY_PRESS_0_5S;
         if(count % 10 == 0)
         {
-           HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
+           HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin);
         }
       }
       else if((count >= 500) && (count < 1000))// 5 000 ~ 10 000 ms
@@ -204,7 +213,7 @@ void StartKeyScanTask(void *argument)
         flag = KEY_PRESS_5_10S;
         if(count % 30 == 0)
         {
-          HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
+          HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin);
         }
       }
       else if((count >= 1000) && (count < 1500))// 10 000 ~ 15 000 ms
@@ -212,7 +221,7 @@ void StartKeyScanTask(void *argument)
         flag = KEY_PRESS_10_15S;
         if(count % 50 == 0)
         {
-          HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
+          HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin);
         }
       }
       else
@@ -223,7 +232,14 @@ void StartKeyScanTask(void *argument)
     }
     else
     {
-      LED2_Reset();
+      if (flag != 0)  // key state changed
+      {
+        if (osMessageQueuePut(KeyStatusQueueHandle, &flag, 0, 100) != osOK)
+        {
+          mprintf("queue send message failed\r\n");
+        }
+      }
+      LED3_Close();
       count = 0;
       flag = 0;
     }

@@ -52,6 +52,9 @@ void MX_GPIO_Init(void)
   HAL_GPIO_WritePin(BEEP_GPIO_Port, BEEP_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_SET);
+
+  /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOB, LED2_Pin|LED1_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin : PtPin */
@@ -61,6 +64,13 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(BEEP_GPIO_Port, &GPIO_InitStruct);
 
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = LED3_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(LED3_GPIO_Port, &GPIO_InitStruct);
+
   /*Configure GPIO pins : PBPin PBPin */
   GPIO_InitStruct.Pin = LED2_Pin|LED1_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;

@@ -187,12 +187,12 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
   /* USER CODE BEGIN Callback 1 */
   if(htim->Instance == TIM3)
   {
-    mprintf("TIM3 elapsed\r\n");
+    // mprintf("TIM3 elapsed\r\n");
     BEEP_call();
   }
   if(htim->Instance == TIM6)
   {
-    mprintf("TIM6 elapsed\r\n");
+    // mprintf("TIM6 elapsed\r\n");
     HAL_TIM_Base_Stop_IT(&htim6);
     BEEP_close();
   }

 #MicroXplorer Configuration settings - do not modify
 FREERTOS.FootprintOK=false
-FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,configTIMER_TASK_STACK_DEPTH,FootprintOK
-FREERTOS.Tasks01=LEDTask,24,128,StartLEDTask,Default,NULL,Dynamic,NULL,NULL;KeyScanTask,24,128,StartKeyScanTask,Default,NULL,Dynamic,NULL,NULL;UartTask,24,512,StartUartTask,Default,NULL,Dynamic,NULL,NULL;CoreTask,24,128,StartCoreTask,Default,NULL,Dynamic,NULL,NULL;SensorTask,24,128,StartSensorTask,Default,NULL,Dynamic,NULL,NULL
+FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,configTIMER_TASK_STACK_DEPTH,FootprintOK,Queues01
+FREERTOS.Queues01=KeyStatusQueue,4,uint8_t,0,Dynamic,NULL,NULL
+FREERTOS.Tasks01=LEDTask,29,512,StartLEDTask,Default,NULL,Dynamic,NULL,NULL;KeyScanTask,27,512,StartKeyScanTask,Default,NULL,Dynamic,NULL,NULL;UartTask,27,512,StartUartTask,Default,NULL,Dynamic,NULL,NULL;CoreTask,27,512,StartCoreTask,Default,NULL,Dynamic,NULL,NULL;SensorTask,29,512,StartSensorTask,Default,NULL,Dynamic,NULL,NULL
 FREERTOS.configTIMER_TASK_STACK_DEPTH=128
 FREERTOS.configTOTAL_HEAP_SIZE=2560
 File.Version=6
@@ -21,14 +22,15 @@ Mcu.Package=LQFP48
 Mcu.Pin0=PC14-OSC32_IN
 Mcu.Pin1=PC15-OSC32_OUT
 Mcu.Pin10=PA14
-Mcu.Pin11=PB6
-Mcu.Pin12=PB7
-Mcu.Pin13=PB8
-Mcu.Pin14=PB9
-Mcu.Pin15=VP_FREERTOS_VS_CMSIS_V2
-Mcu.Pin16=VP_SYS_VS_tim1
-Mcu.Pin17=VP_TIM3_VS_no_output1
-Mcu.Pin18=VP_TIM6_VS_ClockSourceINT
+Mcu.Pin11=PB5
+Mcu.Pin12=PB6
+Mcu.Pin13=PB7
+Mcu.Pin14=PB8
+Mcu.Pin15=PB9
+Mcu.Pin16=VP_FREERTOS_VS_CMSIS_V2
+Mcu.Pin17=VP_SYS_VS_tim1
+Mcu.Pin18=VP_TIM3_VS_no_output1
+Mcu.Pin19=VP_TIM6_VS_ClockSourceINT
 Mcu.Pin2=PF0-OSC_IN
 Mcu.Pin3=PF1-OSC_OUT
 Mcu.Pin4=PA2
@@ -37,7 +39,7 @@ Mcu.Pin6=PA9
 Mcu.Pin7=PA10
 Mcu.Pin8=PA12
 Mcu.Pin9=PA13
-Mcu.PinsNb=19
+Mcu.PinsNb=20
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F030C8Tx
@@ -80,6 +82,13 @@ PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PB5.GPIOParameters=GPIO_Speed,PinState,GPIO_PuPd,GPIO_Label
+PB5.GPIO_Label=LED3
+PB5.GPIO_PuPd=GPIO_PULLUP
+PB5.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PB5.Locked=true
+PB5.PinState=GPIO_PIN_SET
+PB5.Signal=GPIO_Output
 PB6.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label
 PB6.GPIO_Label=LED2
 PB6.GPIO_PuPd=GPIO_PULLDOWN