/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2006-08-23     Bernard      first version
 * 2009-05-14     Bernard      add RT-THread device interface
 */

#include <rthw.h>
#include <rtthread.h>

#include "AT91SAM7S.h"
#include "serial.h"

/**
 * @addtogroup AT91SAM7
 */
/*@{*/
typedef volatile rt_uint32_t REG32;
struct rt_at91serial_hw
{
    REG32    US_CR;     // Control Register
    REG32    US_MR;     // Mode Register
    REG32    US_IER;    // Interrupt Enable Register
    REG32    US_IDR;    // Interrupt Disable Register
    REG32    US_IMR;    // Interrupt Mask Register
    REG32    US_CSR;    // Channel Status Register
    REG32    US_RHR;    // Receiver Holding Register
    REG32    US_THR;    // Transmitter Holding Register
    REG32    US_BRGR;   // Baud Rate Generator Register
    REG32    US_RTOR;   // Receiver Time-out Register
    REG32    US_TTGR;   // Transmitter Time-guard Register
    REG32    Reserved0[5];  //
    REG32    US_FIDI;   // FI_DI_Ratio Register
    REG32    US_NER;    // Nb Errors Register
    REG32    Reserved1[1];  //
    REG32    US_IF;     // IRDA_FILTER Register
    REG32    Reserved2[44];     //
    REG32    US_RPR;    // Receive Pointer Register
    REG32    US_RCR;    // Receive Counter Register
    REG32    US_TPR;    // Transmit Pointer Register
    REG32    US_TCR;    // Transmit Counter Register
    REG32    US_RNPR;   // Receive Next Pointer Register
    REG32    US_RNCR;   // Receive Next Counter Register
    REG32    US_TNPR;   // Transmit Next Pointer Register
    REG32    US_TNCR;   // Transmit Next Counter Register
    REG32    US_PTCR;   // PDC Transfer Control Register
    REG32    US_PTSR;   // PDC Transfer Status Register
};

struct rt_at91serial
{
    struct rt_device parent;

    struct rt_at91serial_hw* hw_base;
    rt_uint16_t peripheral_id;
    rt_uint32_t baudrate;

    /* reception field */
    rt_uint16_t save_index, read_index;
    rt_uint8_t  rx_buffer[RT_UART_RX_BUFFER_SIZE];
};
#ifdef RT_USING_UART1
struct rt_at91serial serial1;
#endif
#ifdef RT_USING_UART2
struct rt_at91serial serial2;
#endif

static void rt_hw_serial_isr(int irqno)
{
    rt_base_t level;
    struct rt_device* device;
    struct rt_at91serial* serial = RT_NULL;

    if (irqno == AT91C_ID_US0)
    {
#ifdef RT_USING_UART1
        /* serial 1 */
        serial = &serial1;
#endif
    }
    else if (irqno == AT91C_ID_US1)
    {
#ifdef RT_USING_UART2
        /* serial 2 */
        serial = &serial2;
#endif
    }
    RT_ASSERT(serial != RT_NULL);

    /* get generic device object */
    device = (rt_device_t)serial;

    /* disable interrupt */
    level = rt_hw_interrupt_disable();

    /* get received character */
    serial->rx_buffer[serial->save_index] = serial->hw_base->US_RHR;

    /* move to next position */
    serial->save_index ++;
    if (serial->save_index >= RT_UART_RX_BUFFER_SIZE)
        serial->save_index = 0;

    /* if the next position is read index, discard this 'read char' */
    if (serial->save_index == serial->read_index)
    {
        serial->read_index ++;
        if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
            serial->read_index = 0;
    }

    /* enable interrupt */
    rt_hw_interrupt_enable(level);

    /* indicate to upper layer application */
    if (device->rx_indicate != RT_NULL)
        device->rx_indicate(device, 1);

    /* ack interrupt */
    AT91C_AIC_EOICR = 1;
}

static rt_err_t rt_serial_init (rt_device_t dev)
{
    rt_uint32_t bd;
    struct rt_at91serial* serial = (struct rt_at91serial*) dev;

    RT_ASSERT(serial != RT_NULL);
    /* must be US0 or US1 */
    RT_ASSERT(((serial->peripheral_id == AT91C_ID_US0) ||
        (serial->peripheral_id == AT91C_ID_US1)));

    /* Enable Clock for USART */
    AT91C_PMC_PCER = 1 << serial->peripheral_id;

    /* Enable RxD0 and TxDO Pin */
    if (serial->peripheral_id == AT91C_ID_US0)
    {
        /* set pinmux */
        AT91C_PIO_PDR = (1 << 5) | (1 << 6);
    }
    else if (serial->peripheral_id == AT91C_ID_US1)
    {
        /* set pinmux */
        AT91C_PIO_PDR = (1 << 21) | (1 << 22);
    }

    serial->hw_base->US_CR = AT91C_US_RSTRX |   /* Reset Receiver      */
                    AT91C_US_RSTTX      |       /* Reset Transmitter   */
                    AT91C_US_RXDIS      |       /* Receiver Disable    */
                    AT91C_US_TXDIS;             /* Transmitter Disable */

    serial->hw_base->US_MR = AT91C_US_USMODE_NORMAL |   /* Normal Mode */
                    AT91C_US_CLKS_CLOCK     |       /* Clock = MCK */
                    AT91C_US_CHRL_8_BITS    |       /* 8-bit Data  */
                    AT91C_US_PAR_NONE       |       /* No Parity   */
                    AT91C_US_NBSTOP_1_BIT;          /* 1 Stop Bit  */

    /* set baud rate divisor */
    bd =  ((MCK*10)/(serial->baudrate * 16));
    if ((bd % 10) >= 5) bd = (bd / 10) + 1;
    else bd /= 10;

    serial->hw_base->US_BRGR = bd;
    serial->hw_base->US_CR = AT91C_US_RXEN |        /* Receiver Enable     */
                    AT91C_US_TXEN;                  /* Transmitter Enable  */

    /* reset rx index */
    serial->save_index = 0;
    serial->read_index = 0;

    /* reset rx buffer */
    rt_memset(serial->rx_buffer, 0, RT_UART_RX_BUFFER_SIZE);

    return RT_EOK;
}

static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
{
    struct rt_at91serial *serial = (struct rt_at91serial*)dev;
    RT_ASSERT(serial != RT_NULL);

    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
    {
        /* enable UART rx interrupt */
        serial->hw_base->US_IER = 1 << 0;       /* RxReady interrupt */
        serial->hw_base->US_IMR |= 1 << 0;      /* umask RxReady interrupt */

        /* install UART handler */
        rt_hw_interrupt_install(serial->peripheral_id, rt_hw_serial_isr, RT_NULL);
        AT91C_AIC_SMR(serial->peripheral_id) = 5 | (0x01 << 5);
        rt_hw_interrupt_umask(serial->peripheral_id);
    }

    return RT_EOK;
}

static rt_err_t rt_serial_close(rt_device_t dev)
{
    struct rt_at91serial *serial = (struct rt_at91serial*)dev;
    RT_ASSERT(serial != RT_NULL);

    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
    {
        /* disable interrupt */
        serial->hw_base->US_IDR = 1 << 0;       /* RxReady interrupt */
        serial->hw_base->US_IMR &= ~(1 << 0);   /* mask RxReady interrupt */
    }

    return RT_EOK;
}

static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
    rt_uint8_t* ptr;
    struct rt_at91serial *serial = (struct rt_at91serial*)dev;
    RT_ASSERT(serial != RT_NULL);

    /* point to buffer */
    ptr = (rt_uint8_t*) buffer;

    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
    {
        while (size)
        {
            /* interrupt receive */
            rt_base_t level;

            /* disable interrupt */
            level = rt_hw_interrupt_disable();
            if (serial->read_index != serial->save_index)
            {
                *ptr = serial->rx_buffer[serial->read_index];

                serial->read_index ++;
                if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
                    serial->read_index = 0;
            }
            else
            {
                /* no data in rx buffer */

                /* enable interrupt */
                rt_hw_interrupt_enable(level);
                break;
            }

            /* enable interrupt */
            rt_hw_interrupt_enable(level);

            ptr ++; size --;
        }

        return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
    }
    else if (dev->flag & RT_DEVICE_FLAG_DMA_RX)
    {
        /* not support right now */
        RT_ASSERT(0);
    }
    else
    {
        /* poll mode */
        while (size)
        {
            /* Wait for Full Rx Buffer */
            while (!(serial->hw_base->US_CSR & AT91C_US_RXRDY));

            /* Read Character */
            *ptr = serial->hw_base->US_RHR;
            ptr ++;
            size --;
        }

        return (rt_size_t)ptr - (rt_size_t)buffer;
    }

    return 0;
}

static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
    rt_uint8_t* ptr;
    struct rt_at91serial *serial = (struct rt_at91serial*)dev;
    RT_ASSERT(serial != RT_NULL);

    ptr = (rt_uint8_t*) buffer;
    if (dev->open_flag & RT_DEVICE_OFLAG_WRONLY)
    {
        if (dev->flag & RT_DEVICE_FLAG_STREAM)
        {
            /* it's a stream mode device */
            while (size)
            {
                /* stream mode */
                if (*ptr == '\n')
                {
                    while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));
                    serial->hw_base->US_THR = '\r';
                }

                /* Wait for Empty Tx Buffer */
                while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));

                /* Transmit Character */
                serial->hw_base->US_THR = *ptr;
                ptr ++; size --;
            }
        }
        else
        {
            while (size)
            {
                /* Wait for Empty Tx Buffer */
                while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));

                /* Transmit Character */
                serial->hw_base->US_THR = *ptr;
                ptr ++; size --;
            }
        }
    }

    return (rt_size_t)ptr - (rt_size_t)buffer;
}

static rt_err_t rt_serial_control (rt_device_t dev, int cmd, void *args)
{
    return RT_EOK;
}

rt_err_t rt_hw_serial_init()
{
    rt_device_t device;

#ifdef RT_USING_UART1
    device = (rt_device_t) &serial1;

    /* init serial device private data */
    serial1.hw_base         = (struct rt_at91serial_hw*)AT91C_BASE_US0;
    serial1.peripheral_id   = AT91C_ID_US0;
    serial1.baudrate        = 115200;

    /* set device virtual interface */
    device->init    = rt_serial_init;
    device->open    = rt_serial_open;
    device->close   = rt_serial_close;
    device->read    = rt_serial_read;
    device->write   = rt_serial_write;
    device->control = rt_serial_control;

    /* register uart1 on device subsystem */
    rt_device_register(device, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
#endif

#ifdef RT_USING_UART2
    device = (rt_device_t) &serial2;

    serial2.hw_base         = (struct rt_at91serial_hw*)AT91C_BASE_US1;
    serial2.peripheral_id   = AT91C_ID_US1;
    serial2.baudrate        = 115200;

    /* set device virtual interface */
    device->init    = rt_serial_init;
    device->open    = rt_serial_open;
    device->close   = rt_serial_close;
    device->read    = rt_serial_read;
    device->write   = rt_serial_write;
    device->control = rt_serial_control;

    /* register uart2 on device subsystem */
    rt_device_register(device, "uart2", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
#endif

    return RT_EOK;
}

/*@}*/